Removal

2AZ-FXE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: REMOVAL

1. REMOVE FRONT WIPER MOTOR AND LINK

(a) Remove the front wiper and link Removal.

2. REMOVE WATER GUARD PLATE RH Removal

3. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL Removal

4. REMOVE COWL BODY MOUNTING REINFORCEMENT RH Removal

5. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Removal

6. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

7. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

9. REMOVE CAMSHAFT POSITION SENSOR

(a) Disconnect the camshaft position sensor connector.





(b) Remove the bolt and camshaft position sensor.