Removal

2AZ-FXE ENGINE CONTROL: CRANKSHAFT POSITION SENSOR: REMOVAL

1. REMOVE ELECTRIC INVERTER COMPRESSOR

(a) Remove the electric inverter compressor Removal.

2. REMOVE V-RIBBED BELT

(a) Remove the V-ribbed belt Removal.

3. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY Removal

4. REMOVE CRANKSHAFT POSITION SENSOR

(a) Disconnect the crankshaft position sensor connector.





(b) Remove the connector clamp and wire harness clamp.

(c) Remove the wire harness clamp bracket from the wire harness.

(d) Remove the bolt, and then remove the crankshaft position sensor.