Installation

STEERING COLUMN: STEERING PAD SWITCH: INSTALLATION

1. INSTALL STEERING PAD SWITCH ASSEMBLY

(a) Engage the 2 pins to install the steering pad switch.





(b) Install the screw.

Torque : 2.4 Nm (25 kgf-cm, 21 in-lbf)

(c) Engage the 2 pins to install the steering pad switch.





(d) Install the screw.

Torque : 2.4 Nm (25 kgf-cm, 21 in-lbf)

(e) Connect the steering pad switch connector to the spiral cable.

(f) Connect the cruise control main switch connector and install the connector clamp.





2. INSTALL STEERING PAD Installation

3. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

4. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

6. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.