Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2011 >> IS 350C V6-3.5L (2GR-FSE) >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Acceleration/Deceleration Sensor >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: YAW RATE AND ACCELERATION SENSOR: INSTALLATION

1. INSTALL YAW RATE AND ACCELERATION SENSOR

(a) Connect the connector.





(b) Install the yaw rate and acceleration sensor with the 2 bolts.





Torque : 15 Nm (148 kgf-cm, 11 ft-lbf)

NOTICE:
* Do not damage the yaw rate and acceleration sensor.
* Make sure that the yaw rate and acceleration sensor is installed securely.

(c) Install the 2 wire harness clamps.

2. INSTALL NO. 2 CONSOLE BOX DUCT (for Automatic Transmission) Installation

3. INSTALL NO. 2 CONSOLE BOX DUCT (for Manual Transmission) Installation

4. INSTALL CONSOLE BOX

HINT
Refer to the instructions for installation of the console box Installation.

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

6. PERFORM YAW RATE AND ACCELERATION SENSOR ZERO POINT CALIBRATION

HINT
Programming and Relearning.

7. INSPECT SENSOR SIGNAL

HINT
Test Mode Procedure.

pro multis · About Operation CHARM