Removal

2UR-GSE ENGINE CONTROL: AIR FUEL RATIO SENSOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Removal

2. REMOVE ENGINE AND TRANSMISSION

(a) Remove the engine and transmission Removal.

3. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

(a) Disconnect the air fuel ratio sensor connector.





(b) Using SST, remove the air fuel ratio sensor from the exhaust manifold LH.

SST : 09224-00010

4. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)

(a) Disconnect the air fuel ratio sensor connector.





(b) Using SST, remove the air fuel ratio sensor from the exhaust manifold RH.

SST : 09224-00010