Installation

NAVIGATION: DISPLAY AND NAVIGATION ASSEMBLY: INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL NO. 2 RADIO BRACKET

(a) Install the bracket with the 2 bolts.

2. INSTALL NO. 1 RADIO BRACKET

(a) Install the bracket with the 2 bolts.

3. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH BRACKET

(a) Connect the connectors.

(b) Insert the display and navigation module display with bracket to attach the 6 clips on its backside.

4. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET Installation

5. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

6. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY Installation

7. INSTALL NO. 3 BOX PANEL Installation

8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

9. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

10. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

12. INSTALL COWL TOP VENTILATOR LOUVER RH Installation