Installation

CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: INSTALLATION

1. INSTALL CRUISE CONTROL MAIN SWITCH ASSEMBLY

(a) Install the switch.





(b) Install the 2 screws.





(c) Connect the connector and clamp.





2. INSTALL STEERING PAD Installation

3. INSTALL SWITCH AND VOLUME CASE Installation

4. INSTALL NO. 2 STEERING WHEEL COVER LOWER Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. INSTALL COWL TOP VENTILATOR LOUVER RH Installation

7. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.