Cylinder Head Assembly

Cylinder Head Bolts

Minimum outside diameter 10.6 mm (0.417 in.)

If the diameter is less than the minimum, replace the cylinder head bolt.

Cylinder Head





Bank 1





Bank 2

Step 1 36 Nm (367 kgf-cm, 27 ft-lbf)
Step 2 90°
Step 3 additional 90°

Bank 1:

Torque 21 Nm (214 kgf-cm, 15 ft-lbf)

Maximum warpage 0.10 mm (0.0039 in.)

Camshaft housing





Bank 1





Bank 2

Bolt A 10 Nm (102 kgf-cm, 7 ft-lbf)
Except bolt A 30 Nm (306 kgf-cm, 22 ft-lbf)





Bank 1





Bank 2

Torque 16 Nm (163 kgf-cm, 12 ft-lbf)

Intake Manifold Specifications

Exhaust Manifold Specifications

Camshaft Gear Specifications