Removal

2UR-FSE ENGINE CONTROL SYSTEM: MASS AIR FLOW METER: REMOVAL

HINT
When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY LH

(a) Disconnect the MAF meter connector.

(b) Remove the 2 clamps, loosen the hose clamp and remove the air cleaner cap LH.

3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY RH

(a) Disconnect the MAF meter connector.

(b) Remove the 2 clamps, loosen the hose clamp and remove the air cleaner cap RH.

4. REMOVE MASS AIR FLOW METER SUB-ASSEMBLY (for Bank 1)

(a) Remove the 2 screws and MAF meter.





5. REMOVE MASS AIR FLOW METER SUB-ASSEMBLY (for Bank 2)

(a) Remove the 2 screws and MAF meter.