Installation

CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): INSTALLATION

1. INSTALL NO. 2 TELEPHONE BRACKET

(a) Install the telephone bracket RH to the telematics transceiver with the 2 screws.

Torque : 3.0 Nm (31 kgf-cm, 27 in-lbf)

(b) Install the telephone bracket LH to the telematics transceiver with the 2 screws.

Torque : 3.0 Nm (31 kgf-cm, 27 in-lbf)

2. INSTALL DCM(TELEMATICS TRANSCEIVER)

(a) Install the telematics transceiver with bracket with the 3 screws.

Torque : 3.0 Nm (31 kgf-cm, 27 in-lbf)

(b) Connect the 4 connectors.

3. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY Installation

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. INSTALL ENGINE ROOM SIDE COVER LH Installation

6. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.

7. PERFORM DCM ACTIVATION

(a) Perform DCM activation DCM Activation.

NOTICE:
When replacing the telematics transceiver, perform DCM activation.