Removal

CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): REMOVAL

1. REMOVE ENGINE ROOM SIDE COVER LH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
* w/ Navigation System:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY Removal

4. REMOVE DCM(TELEMATICS TRANSCEIVER)

(a) Disconnect the 4 connectors.





(b) Remove the 3 screws and telematics transceiver with bracket.

5. REMOVE NO. 2 TELEPHONE BRACKET





(a) Remove the 2 screws and telephone bracket LH.

(b) Remove the 2 screws and telephone bracket RH.