Installation

U660F AUTOMATIC TRANSMISSION / TRANSAXLE: ATF TEMPERATURE SENSOR: INSTALLATION

1. INSTALL ATF TEMPERATURE SENSOR ASSEMBLY

(a) Coat a new O-ring with ATF and install it to the ATF temperature sensor assembly.





Text in Illustration





(b) Coat the 4 bolts with ATF.

(c) Install the ATF temperature sensor assembly and clamp to the valve body with the 4 bolts.





Text in Illustration





Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)

Bolt length:

Bolt A
25 mm (0.984 in.)

Bolt B
85 mm (3.35 in.)

(d) Connect the connector.

2. INSTALL VALVE BODY OIL STRAINER ASSEMBLY Installation

3. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY Installation

4. INSTALL TORQUE CONVERTER CLUTCH ASSEMBLY Installation

5. INSTALL TRANSFER ASSEMBLY Installation

6. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY

HINT
See the steps from "Install Automatic Transaxle Assembly" through "Install Engine Assembly with Transaxle" Installation.