Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2011 >> RX 450h AWD V6-3.5L (2GR-FXE) Hybrid >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Tank Pressure Sensor >> Service and Repair >> Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal





2GR-FXE EMISSION CONTROL: FUEL TANK PRESSURE SENSOR: REMOVAL

1. REMOVE FUEL TANK ASSEMBLY

(a) Remove the fuel tank assembly Removal.

2. REMOVE VAPOR PRESSURE SENSOR

(a) Disconnect the connector.





(b) Remove the tube joint clip, and pull out the vapor pressure sensor.





Text in Illustration





NOTICE:
* Before this operation, check that there is no dirt or other foreign objects around the connector. Clean the connector if necessary.
* It is necessary to prevent mud or dirt from entering the connector. If mud or dirt gets in the connector, the O-ring may not seal properly.
* Do not use any tools for this operation.
* If the fuel suction plate and vapor pressure sensor are stuck, carefully try wiggling or pushing and pulling on the vapor pressure sensor to release it. Pull the sensor off the suction plate carefully.
pro multis · About Operation CHARM