Installation

NAVIGATION / MULTI INFO DISPLAY: MULTI-DISPLAY: INSTALLATION

1. INSTALL MULTI-DISPLAY SUB-ASSEMBLY

(a) Connect earth connector.

(b) Engage the clamp.

(c) Engage the 2 clips as shown in the illustration.





(d) Install the multi-display sub-assembly with the 2 screws.

(e) Engage the 4 guides.

(f) Connect the 5 claws to install the instrument panel finish panel end.

2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

3. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Installation