Installation

DOOR LOCK: BACK DOOR LOCK: INSTALLATION

1. INSTALL BACK DOOR LOCK ASSEMBLY

HINT
Make sure to remove the string before installing a new back door lock assembly.

(a) Apply MP grease to the sliding parts of the back door lock assembly.

(b) Install the back door lock assembly with the 3 bolts.

Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

(c) Engage the 4 clamps.

(d) Connect the connector.

2. INSPECT BACK DOOR Adjustments

3. ADJUST BACK DOOR Adjustments

4. INSTALL REAR DECK TRIM COVER Installation

5. INSTALL DECK TRIM SERVICE HOLE COVER Installation

6. INSTALL DECK FLOOR BOX LH (w/o Woofer) Installation

7. INSTALL REAR NO. 4 FLOOR BOARD (w/o Woofer) Installation

8. INSTALL REAR NO. 4 FLOOR BOARD (w/ Woofer) Installation

9. INSTALL DECK FLOOR BOX RH Installation

10. INSTALL REAR NO. 3 FLOOR BOARD Installation

11. INSTALL REAR DECK FLOOR BOX Installation

12. INSTALL REAR NO. 2 FLOOR BOARD Installation