Removal

2ZR-FXE ENGINE CONTROL: HEATED OXYGEN SENSOR: REMOVAL

1. REMOVE FRONT NO. 3 ENGINE UNDER COVER

(a) Remove the 4 clips and front No. 3 engine under cover.





2. REMOVE HEATED OXYGEN SENSOR

(a) Disconnect the heated oxygen sensor connector.





(b) Remove the wire harness bracket.

(c) Remove the bolt and separate the wire harness clamp bracket.

(d) Disconnect the wire harness to remove the wire harness clamp bracket.





(e) Using SST, remove the heated oxygen sensor.





SST : 09224-00010