Removal

BRAKE CONTROL: YAW RATE AND ACCELERATION SENSOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY WITH FRONT ASH RECEPTACLE Removal

4. REMOVE INSTRUMENT PANEL FINISH END PANEL LH Removal

5. REMOVE INSTRUMENT PANEL FINISH END PANEL RH Removal

6. REMOVE CONSOLE POCKET Removal

7. REMOVE CONSOLE BOX CARPET Removal

8. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY Removal

9. REMOVE REAR CONSOLE BOX ASSEMBLY Removal

10. REMOVE NO. 3 CONSOLE BOX DUCT Removal

11. REMOVE YAW RATE AND ACCELERATION SENSOR

(a) Disconnect the yaw rate sensor connector and clamp.





(b) Remove the 2 bolts and yaw rate sensor.

NOTICE:
Do not remove the sensor from the bracket.