Removal

DOOR LOCK: BACK DOOR LOCK: REMOVAL

1. REMOVE BACK DOOR CENTER GARNISH Disassembly

2. REMOVE BACK DOOR SIDE GARNISH LH Disassembly

3. REMOVE BACK DOOR SIDE GARNISH RH Disassembly

4. REMOVE BACK DOOR TRIM COVER Disassembly

5. REMOVE UPPER TOOL BOX PANEL SUB-ASSEMBLY Disassembly

6. REMOVE TOOL CASE Disassembly

7. REMOVE BACK DOOR LOCK COVER Disassembly

8. REMOVE BACK DOOR TRIM PANEL ASSEMBLY Disassembly

9. REMOVE BACK DOOR SERVICE HOLE COVER Disassembly

10. REMOVE BACK DOOR LOCK ASSEMBLY

(a) Disconnect the connector.

(b) Using a T30 "TORX" wrench, remove the 3 screws.





NOTICE:
Be careful when removing the screws as the door lock may fall and become damaged.

(c) Disconnect the cable and remove the back door lock assembly.





(d) Remove the door lock wiring harness seal from the back door lock assembly.