Service Data

SPECIFICATIONS: ALIGNMENT / HANDLING DIAGNOSIS: SERVICE DATA

MEASURE VEHICLE HEIGHT





NOTICE:
^ Before inspecting the wheel alignment, adjust the vehicle height to the specified value.
^ Be sure to perform measurement on a level surface.
^ If it is necessary to go under the vehicle for measurement, confirm that the parking brake is applied and the vehicle is secured with chocks.
^ Inspect while the vehicle is unloaded.
^ The standard value shown here is a value that is used for adjusting the wheel alignment and does not indicate the height of an actual vehicle.

Vehicle Height (Unloaded Vehicle)





Measurement points:

* A: Ground clearance of front No. 1 lower suspension arm bushing set bolt center

* B: Ground clearance of rear No. 2 suspension arm set bolt center

* C: Ground clearance of front wheel center

* D: Ground clearance of rear wheel center

Camber (Unloaded Vehicle)





Caster (Unloaded Vehicle)





Steering Axis Inclination (Unloaded Vehicle)





Toe-in (Unloaded Vehicle)





Wheel Turning Angle (Unloaded Vehicle)