Removal

2AZ-FXE ENGINE CONTROL: CAMSHAFT OIL CONTROL VALVE: REMOVAL

1. REMOVE FRONT WIPER MOTOR AND LINK

(a) Remove the front wiper motor and link Removal.

2. REMOVE WATER GUARD PLATE RH Removal

3. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL Removal

4. REMOVE COWL BODY MOUNTING REINFORCEMENT RH Removal

5. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Removal

6. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

7. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

(a) Disconnect the camshaft timing oil control valve assembly connector.





(b) Remove the bolt and camshaft timing oil control valve assembly.

(c) Remove the O-ring from the camshaft timing oil control valve assembly.