Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM (w/o Navigation System without Multi-display): Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory
- Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory
INSPECTION PROCEDURE
NOTICE:
* Some satellite radio broadcasts require payment. A contract must be made between a satellite radio company and the user. If the contract expires, the broadcast will not be able to be listened to or viewed.
* After replacing the radio receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, the XM Radio ID registration is necessary.
PROCEDURE
1. CHECK RADIO RECEIVER ASSEMBLY
(a) Check radio condition.
Result:
B -- CHECK RADIO RECEIVER ASSEMBLY
A -- ADD PRESET CHANNEL INTO MEMORY AGAIN
2. CHECK RADIO RECEIVER ASSEMBLY
(a) Check the number of preset channels.
Result:
B -- CHECK BATTERY
A -- END (ONLY 18 CHANNELS CAN BE PRESET)
3. CHECK BATTERY
(a) Check if the battery was replaced.
OK:
Battery was not replaced.
NG -- ADD PRESET CHANNEL INTO MEMORY AGAIN
OK -- REPLACE RADIO RECEIVER ASSEMBLY Removal
4. ADD PRESET CHANNEL INTO MEMORY AGAIN
(a) Check if the preset channels that have been cleared can be added into memory again.
OK:
Preset channels can be added into memory.
NG -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table
OK -- END