Installation

4GR-FSE STARTING: ENGINE SWITCH: INSTALLATION

1. INSTALL ENGINE SWITCH

(a) Attach the 2 claws to install the switch.





(b) Connect the switch connector.

2. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Multi-display) Installation

3. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Multi-display) Installation

4. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Installation

5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

6. INSTALL CONSOLE BOX Installation

7. INSTALL CONSOLE BOX REGISTER ASSEMBLY (w/ Ashtray) Installation

8. INSTALL CONSOLE BOX REGISTER ASSEMBLY (w/o Ashtray) Installation

9. INSTALL FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY (w/ Ashtray) Installation

10. INSTALL INSTRUMENT PANEL BOX ASSEMBLY (w/o Ashtray) Installation

11. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Installation

12. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Installation

13. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) Installation

14. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission) Installation

15. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission) Installation

16. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

17. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission)