Installation

LIGHTING (INT): FRONT DOOR COURTESY SWITCH: INSTALLATION

1. INSTALL FRONT DOOR COURTESY SWITCH ASSEMBLY

(a) Connect the connector.





(b) Using "TORX" socket wrench T30, install the front door courtesy switch assembly with the "TORX" bolt.

Torque : 6.4 Nm (65 kgf-cm, 57 in-lbf)

2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY (for LH Side) Installation

3. CONNECT FRONT SEAT OUTER BELT ASSEMBLY (for LH Side) Installation

4. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY (for RH Side) Installation

5. CONNECT FRONT SEAT OUTER BELT ASSEMBLY (for RH Side) Installation

6. INSTALL LAP BELT OUTER ANCHOR COVER Installation

7. REMOVE DOOR SCUFF PLATE ASSEMBLY Installation

8. INSTALL REAR SEATBACK ASSEMBLY WITH REAR CONSOLE BOX ASSEMBLY Installation

9. INSTALL REAR SEAT CUSHION ASSEMBLY LH Installation

10. INSTALL REAR SEAT CUSHION ASSEMBLY RH Installation

11. INSTALL PACKAGE TRAY TRIM GARNISH LH Installation

12. INSTALL PACKAGE TRAY TRIM GARNISH RH Installation

13. CLOSE METALTOP ROOF Installation