Installation

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING ECU: INSTALLATION

1. INSTALL TIRE PRESSURE WARNING RECEIVER ASSEMBLY

(a) Install the tire pressure warning receiver assembly.





(b) Install the bolt.





Torque : 4.5 Nm (46 kgf-cm, 40 in-lbf)

2. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)

HINT
Refer to the procedures from Install Integration Control Panel with Radio Receiver Assembly Installation.

3. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)

HINT
Refer to the procedures from Install Multi-display with Radio Receiver Assembly Installation.

4. REGISTER OF TRANSMITTER ID

(a) Register all transmitter IDs Registration.

5. PERFORM INITIALIZATION

(a) Perform initialization Initialization.

6. INSPECT TIRE PRESSURE WARNING SYSTEM

(a) Inspect the tire pressure warning system Test Mode Procedure.