Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2012 >> IS 250C V6-2.5L (4GR-FSE) >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Fuel Pressure Sensor/Switch >> Service and Repair >> Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal





4GR-FSE FUEL: FUEL PRESSURE SENSOR: REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. DISCHARGE FUEL SYSTEM PRESSURE

HINT
Service Precautions.

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

4. REMOVE INTAKE MANIFOLD

HINT
Removal.

5. DISCONNECT WATER HOSE JOINT Removal

6. REMOVE NO. 1 FUEL PIPE SUB-ASSEMBLY Removal

7. REMOVE FUEL PRESSURE SENSOR





(a) Disconnect the connector and clamp.

(b) Remove the fuel pressure sensor and gasket.
pro multis · About Operation CHARM