Removal
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: YAW RATE AND ACCELERATION SENSOR: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
2. REMOVE CONSOLE BOX
HINT
Refer to the instructions for Removal of the console box Removal.
3. REMOVE NO. 2 CONSOLE BOX DUCT Removal
4. REMOVE YAW RATE AND ACCELERATION SENSOR
(a) Separate the 2 wire harness clamps.
(b) Remove the 2 bolts and yaw rate and acceleration sensor.
(c) Disconnect the yaw rate and acceleration sensor connector.
NOTICE:
Do not remove the sensor from the bracket.