Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2012 >> IS F V8-5.0L (2UR-GSE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oil Temperature Sensor For ECM >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





2UR-GSE ENGINE CONTROL: ENGINE OIL TEMPERATURE SENSOR: INSTALLATION

1. INSTALL OIL TEMPERATURE SENSOR

(a) Using SST, install the temperature sensor with a new gasket.





SST : 09922-10010

without SST - Torque : 39 Nm (400 kgf-cm, 29 ft-lbf)

with SST - Torque : 30 Nm (301 kgf-cm, 22 ft-lbf)

NOTICE:
* The "with SST" torque value is effective when using SST with a fulcrum length of 96 mm (3.78 in.).
* The "with SST" torque value is effective when using a torque wrench with a fulcrum length of 300 mm (11.81 in.) Service Precautions.
* The "with SST" torque value is effective when SST is parallel to the torque wrench.
* Do not subject the temperature sensor to any impacts.
* If the sensor is subjected to an impact, replace the temperature sensor with a new one.
* Do not allow any moisture or foreign matter to enter the temperature sensor or its connector.

(b) Connect the temperature sensor connector.

2. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

(a) Install the engine oil pressure switch Installation.

3. INSPECT FOR OIL LEAK
pro multis · About Operation CHARM