Removal

METER: LIGHT CONTROL RHEOSTAT: REMOVAL

1. DISABLE AUTO TILT AWAY FUNCTION

(a) Disable the AUTO TILT AWAY function by changing the customize parameter Repair Instruction - Customize Parameters.

NOTICE:
Record the current customize parameter setting (whether the AUTO TILT AWAY function is enabled or disabled) in order to restore the current setting after finishing the operation.

HINT
Performing the above operation causes the AUTO TILT AWAY function to be disabled when the engine switch is turned off.

(b) Turn the engine switch on (IG). Operate the tilt and telescopic switch to fully extend and lower the steering column.

(c) Turn the engine switch off.

2. REMOVE STEERING COLUMN COVER Removal

3. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY Removal

4. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal

5. REMOVE LIGHT CONTROL RHEOSTAT

(a) Detach the 2 claws and remove the rheostat.