Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2012 >> LS 460 RWD V8-4.6L (1UR-FSE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oxygen Sensor >> Service and Repair >> Heated Oxygen Sensor >> Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal





1UR-FSE ENGINE CONTROL SYSTEM: HEATED OXYGEN SENSOR (for 2WD): REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE LH Removal

2. REMOVE FRONT DOOR SCUFF PLATE RH Removal

3. REMOVE COWL SIDE TRIM BOARD LH Removal

4. REMOVE COWL SIDE TRIM BOARD RH Removal

5. REMOVE FRONT FLOOR SILENCER PAD LH

6. REMOVE FRONT FLOOR SILENCER PAD RH

7. REMOVE REAR NO. 2 AIR DUCT

8. REMOVE REAR NO. 1 AIR DUCT

9. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

(a) Disconnect the heated oxygen sensor connector.





(b) Remove the grommet.





(c) Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

SST : 09224-00010

10. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)

(a) Disconnect the heated oxygen sensor connector.





(b) Remove the grommet.





(c) Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

SST : 09224-00010
pro multis · About Operation CHARM