Alignment

Wheel Alignment Specifications (Unloaded Vehicle)

Standard Vehicle Height:

Standard Camber Inclination:

Standard Caster Inclination:

Standard Steering Axis Inclination:

Standard Toe-in:

Standard Wheel Turning Angle:

Measuring Points:

Vehicle Height (*A = 2WD *B = 4WD):

A - Ground clearance of front wheel center

B - Ground clearance of front center position of front suspension lower arm assembly front bush installation

C - Ground clearance of rear wheel center

D - Ground clearance of rear center position of rear suspension No. 2 arm bush installation bolt screw thread

NOTICE:
- The standard value shown here is a value that is used for adjusting the wheel alignment and does not indicate the height of an actual vehicle.
- Before inspecting the wheel alignment, adjust the vehicle height to the specified value.

Toe-in:

Wheel Turning Angle:

Toe-in - Rear: