Rear Bumper Cover / Fascia: Service and Repair

REAR BUMPER COVER - NAVIGATOR

Removal and Installation

All Vehicles







1. Remove the upper rear bumper cover pin-type retainers.







2. Remove the rear bumper cover to inner splash shield screw on each side.







3. Remove the three rear bumper cover to quarter panel bracket bolts on each side.







4. Remove the two rear bumper cover to quarter panel nuts on each side.

Vehicles with Parking Aid
5. Disconnect the parking aid sensor harness connector.

All Vehicles







6. Lift upward on the corners of the rear bumper cover and remove the rear bumper cover.
7. To install, reverse removal procedure. Transfer all necessary components.