40 Percent E-Z Entry

REMOVAL

NOTE: Second row E-Z entry seat shown, quad seat similar.







1. Remove the E-Z seat riser to floor bolts.
1 Remove the bolt covers.
2 Remove the bolts.

2. Fold the seat forward to gain access to the seat strap bolt.







3. Remove the seat strap bolt.







4. Remove the seat.

CAUTION: Do not damage the anti-chuck hook while removing or storing the 40% E-Z entry seat. The weight of the seat should never rest on the anti-chuck hook, as damage to the hook may occur.

INSTALLATION







1. To install, reverse the removal procedure.







2. Check the restraint system for correct operation.