Test W: LFC 36/DTC B1995 - Driver Side Air Bag Circuit Resistance Lo

W1:

W1 - W2:

W2 - W3:

W4 - W5:

W6 - W7:

Normal Operation
The Resistance Control Module (RCM) monitors the resistance of the driver side air bag circuit loop and the air bag module igniter at RCM C1 pins 2 and 3. If the resistance is less than 1.4 ohms, the RCM will store Diagnostic Trouble Code (DTC) B1995 and flash Lamp Fault Code (LFC) 36.

Possible Causes
A low resistance on the driver side air bag circuit can be caused by:
^ damaged wiring on circuit 1257 (WH/LB).
^ damaged wiring on circuit 1258 (BN/LB).
^ damaged driver side air bag module.
^ damaged RCM.
^ worn or damaged shorting bar or camming beam in C2004 or C308.