Inflation and Deflation of the Air Suspension System

Special Tools:

WARNING:

- Do not remove an air spring under any circumstances when there is pressure in the air spring. Do not remove any components supporting an air spring without either exhausting the air or providing support for the air spring to prevent vehicle damage or personal injury.
- Disconnecting an air line that is connected to the air compressor can cause personal injury or damage to components as high pressure air is vented uncontrolled.

1. Turn the air suspension switch on.
2. Turn the ignition switch to the RUN position.
3. Connect scan tool to the Data Link Connector (DLC).
4. Select Air Suspension Control Module under Active Command Mode:
- VENT FRNT to deflate the front down.
- LIFT FRNT to inflate the front up.
- VENT REAR to deflate the rear down.
- LIFT REAR to inflate the rear up.