Compressor

Fig. 37 6P148 Six cylinder compressor removal:

Manual A/C System
1. Discharge refrigerant from system.
2. Discharge compressor clutch wires from field coil connector on compressor.
3. Disconnect the discharge and suction hoses from compressor manifolds. Cap refrigerant lines and compressor manifolds to prevent contamination.
4. Remove the two screws from rear support bracket.
5. Remove three screws attaching compressor tab and front legs to front support, Fig. 37.
6. Remove one screw from front of tubular brace, then tubular brace from vehicle.
7. Rotate the compressor towards left side of engine compartment until compressor upper boss clears support.
8. Remove compressor assembly and rear support from vehicle.
9. Reverse procedure to install.