Operation CHARM: Car repair manuals for everyone.
Home >> Lincoln >> 1990 >> Continental V6-232 3.8L >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Safing Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Safing Sensor: Service and Repair

Removal

WARNING: THE ELECTRICAL CIRCUIT NECESSARY FOR SYSTEM DEPLOYMENT IS POWERED DIRECTLY FROM THE BATTERY AND BACKUP POWER SUPPLY. TO AVOID ACCIDENTAL DEPLOYMENT AND POSSIBLE PERSONAL INJURY, THE BATTERY GROUND CABLE AND BACKUP POWER SUPPLY MUST BE DISCONNECTED PRIOR TO SERVICING OR REPLACING ANY SYSTEM COMPONENTS.

1. Disconnect battery ground cable and backup power supply.





2. Disconnect the rear sensor wiring connector from wiring assembly connector.
3. Remove two screws attaching rear sensor to dash panel.
4. Remove rear sensor from dash panel in engine compartment.

Installation
1. Position sensor to dash panel.
2. Secure sensor with two screws. Tighten to 3.3-4.5 N.m (29-40 lb-in).
3. Connect rear sensor wiring connector to wiring assembly connector.
4. Connect backup power supply and battery ground cable.
5. Verify air bag indicator lamp.
pro multis · About Operation CHARM