Cabin Temperature Sensor / Switch: Service and Repair

REMOVAL
1. Disengage the glove compartment door stops and allow the door to hang by the hinge.




2. Working through the glove compartment opening, unclip the sensor from the retainer by squeezing the side tabs (illustration).
3. Pull the sensor down into the glove compartment. Then disconnect the electrical connector and aspirator flex hose from the sensor.

INSTALLATION
1. Connect the electrical connector and aspirator flex hose to the sensor.
2. Working through the glove compartment opening, attach the sensor to the retaining clip.
3. Engage the glove compartment door stops and close the door.