Operation CHARM: Car repair manuals for everyone.
Home >> Lincoln >> 1992 >> Continental V6-232 3.8L >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Module HVAC >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Module HVAC: Service and Repair

REMOVAL




1. Disengage glove compartment door stops and allow door to hang by hinge (illustration).




2. Working through glove compartment opening, disconnect electrical snap-lock connector and aspirator hose at blower motor controller (illustration).
3. Disconnect snap-lock connector from its mounting bracket.
4. Remove two screws retaining blower controller to evaporator case and remove controller. Do not touch fins ot controller until it has had sufficient time to cool.

INSTALLATION
1. Position blower controller on evaporator case and install two retaining screws.
2. Connect wire connector and aspirator hose to blower controller. Install connector on mounting bracket.
3. Close glove compartment door.
4. Check system for proper operation.

pro multis · About Operation CHARM