Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

XB62 - Check ACP SIG RTN For Short to Power



- Key "OFF".

- A/C Pressure (ACP) sensor disconnected.

- Disconnect Variable Control Relay Module (VCRM). Inspect for damaged or pushed out pins, corrosion, loose wires, etc. Service as necessary.

- Key "ON".

- Measure voltage between the ACP VREF circuit at the ACP sensor vehicle harness connector and the battery negative post.

- Key "OFF".

- Was the voltage less than 1.0 volt?

Yes -- Replace VCRM. Reconnect all components. Clear continuous memory. Clearing Diagnostic Trouble Codes

Attempt to reset Diagnostic Trouble Code (DTC) 579 (Refer to XB52 for procedure only). XB52 - Clear and Attempt to Regenerate DTC

Rerun quick test. Quick Test Appendix (Detailed Testing Instructions)

No -- Service ACP VREF circuit short to power. Reconnect all components. Clear continuous memory. Clearing Diagnostic Trouble Codes

Attempt to reset DTC 579 (Refer to XB52 for procedure only). XB52 - Clear and Attempt to Regenerate DTC

Rerun quick test. Quick Test Appendix (Detailed Testing Instructions)