Keyless Entry Key-Pad: Service and Repair

1. Enter the five digit permanent entry code into keyless entry keypad.
2. Within five seconds of pressing last button of permanent code, press the 1/2 button within five seconds of pressing the last button of the permanent code.
3. Enter any alternate five digit code within five seconds of pressing 1/2 button.
^ Enter a sixth digit as follows to indicate operator's memory seat setting to be set by alternate code:

9/0-memory OFF
1/2-memory position 1
3/4-memory position 2

^ After successful programming, the doors will signal by locking and then unlocking.