Operation CHARM: Car repair manuals for everyone.
Home >> Lincoln >> 1996 >> Continental V8-4.6L DOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oxygen Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oxygen Sensor: Service and Repair






REMOVAL AND INSTALLATION
1. Disconnect battery ground cable.

NOTE: When the battery has been disconnected or reconnected, some abnormal drive symptoms may occur while the Powertrain Control Module (PCM) relearns its strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.

2. Raise vehicle on hoist.
3. Disconnect engine control sensor wiring.
4. Remove heated oxygen sensors from dual converter "Y" pipe and/or exhaust connector using Oxygen Sensor Wrench T94P-9472-A.

NOTE: If excessive force is needed to remove heated oxygen sensor, lubricate heated oxygen sensor with penetrating oil prior to removal.

5. To install, reverse removal procedure. Tighten heated oxygen sensors to 36-46 Nm (26-34 lb ft).
pro multis · About Operation CHARM