Cabin Temperature Sensor / Switch: Service and Repair
Radio Removal Tool:
SPECIAL TOOL(S)
REMOVAL
1. Use the Radio Removing Tool to remove the radio chassis.
2. Disconnect the antenna lead and the wire harness connectors.
3. Remove the screws from the radio chassis opening.
4. Remove the screws and the cluster opening finish panel.
5. Disconnect the headlight and dimmer switch wire harness connectors.
6. Disconnect the clock wire harness connector.
7. Remove the screw.
8. Disconnect the wire harness connector and remove the sensor from the hose.
INSTALLATION
1. Follow the removal procedure in reverse order.