Module - Portable Support Electronics (PSE) Module
Module - Portable Support Electronics (PSE) ModuleREMOVAL
1. Disconnect the battery ground cable.
2. Remove the luggage compartment front cover.
1 Remove the pin-type retainers.
2 Remove the luggage compartment front cover.
3. Pull down the module tray pin-type retainers and pull down the rear of the module tray.
4. Remove the portable support electronics module.
1 Disconnect the electrical connectors.
2 Remove the portable support electronics module.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE:
^ Be sure the module tray pin-type retainers (if equipped) are fully seated so the tray will not rattle.
^ When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.