Operation CHARM: Car repair manuals for everyone.
Home >> Lincoln >> 2000 >> LS V8-3.9L VIN A >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Yaw Rate Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Yaw Rate Sensor: Service and Repair

Removal

Note: The stability assist module needs to be recalibrated whenever a component is disconnected, moved, or a new component is installed. For additional information regarding the recalibration procedure and when the recalibration procedure should be carried out, refer to Antilock Brakes / Traction Control Systems; Testing and Inspection.


1. Remove the floor console.





2. Remove the center A/C duct.





3. Disconnect the yaw rate sensor electrical connector.





4. Remove the yaw rate sensor.
1 Remove the yaw rate sensor bolts.
2 Remove the yaw rate sensor.

Installation

Note: The stability assist module needs to be recalibrated whenever a component is disconnected, moved, or a new component is installed. For additional information regarding the recalibration procedure and when the recalibration procedure should be carried out, refer to Antilock Brakes / Traction Control Systems; Testing and Inspection.


Note: The yaw rate sensor is positioned with the connector pointed to the left side of the vehicle. Be sure to mount the sensor in this orientation during the installation procedure.





1. To install, reverse the removal procedure.
pro multis · About Operation CHARM