Operation CHARM: Car repair manuals for everyone.
Home >> Lincoln >> 2000 >> LS V8-3.9L VIN A >> Repair and Diagnosis >> Brakes and Traction Control >> Hydraulic System >> Brake Fluid Pressure Sensor/Switch >> Service and Repair >> Transducer -Primary
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transducer -Primary

Removal

Note: The stability assist module needs to be recalibrated whenever a component is disconnected, moved, or a new component is installed. For additional information regarding the recalibration procedure and when the recalibration procedure should be carried out, refer to Antilock Brakes / Traction Control Systems; Testing and Inspection.





1. Position the vapor management valve aside.
1 Remove the vapor management valve bracket bolts.
2 Position the vapor management valve aside.





2. Disconnect the main pressure transducer electrical connector.





3. Remove the main pressure transducer.

Installation

Note: The stability assist module needs to be recalibrated whenever a component is disconnected, moved, or a new component is installed. For additional information regarding the recalibration procedure and when the recalibration procedure should be carried out, refer to Antilock Brakes / Traction Control Systems; Testing and Inspection.


1. To install, reverse the removal procedure.
pro multis · About Operation CHARM