Blower Motor: Service and Repair

REMOVAL







1. Remove the screw and reposition the windshield washer fluid reservoir.







2. Remove the screws from the rear of the RH fender apron and reposition the fender apron.







3. Disengage the wire harness connector from the retainer.







4. Disconnect the wire harness connector.







5. Remove the hose.







6. Remove the screws and remove the blower motor.







7. Remove the wheel from the blower motor.
1 Remove the push clip.
2 Remove the wheel from the blower motor.

CAUTION: Prior to removing a wheel that is to be reused, clean any corrosion from the blower motor shaft to prevent damage to the wheel mounting diameter.

INSTALLATION







1. Follow the removal procedure in reverse order.