Intake Manifold

Upper Intake Manifold

Install the upper intake manifold:
^ Install the bolts.
^ Tighten the bolts to 10 Nm (89 inch lbs.) and then an additional 90 degrees in the sequence shown.

Lower Intake Manifold

NOTE: Bolts should be hand-started, positions 7-12 first then 1-6.

Install the lower intake manifold:
^ Position the gaskets.
^ Install the intake manifold.
^ Install the bolts.
^ Tighten the bolts to 10 Nm (89 inch lbs.) and then an additional 90 degrees in the sequence shown.

Throttle Body
Throttle Body Bolts: 9 Nm (80 inch lbs.).