Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oxygen Sensor: Service and Repair

EGO Sensor Wrench:






SPECIAL TOOL(S)

REMOVAL
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.







3. Disconnect the electrical connectors from the Heated Oxygen Sensors (HO2S).







4. Remove the heated oxygen sensors from the exhaust manifolds and exhaust pipe using the special tool.

INSTALLATION







1. To install, reverse the removal procedure.

NOTE: Apply a light coat of High Temperature Nickel Anti-Seize Lubricant F6AZ-9LA94-AA or equivalent meeting Ford specification ESE-M12A4-A to the threads prior to installation.