Cellular Phone Antenna

REMOVAL







1. Remove the cellular phone antenna base.
1 Disconnect the antenna cable.
2 Cut the two-way tape holding the cellular phone antenna base to the glass.

CAUTION: To avoid damage to the glass, do not pry the antenna base when removing.

INSTALLATION
1. To install, reverse the removal procedure.

NOTE:
^ Before applying new two-way tape to install the cellular phone antenna base, use Ultra-Clear Spray Glass Cleaner E4AZ-19C507-AA meeting Ford specification ESR-M14P5-A or equivalent to thoroughly clean the glass.
^ Inside and outside antenna bases must be carefully and accurately aligned so they do not cover any heater wire grids.
^ The coaxial cable connector must be installed toward the right of the vehicle.