Receiver Drier

REMOVAL
1. Recover the refrigerant.
2. Raise the vehicle.







3. Remove the screws and remove the LH sight shield.







4. Remove the screws and remove the air deflector.







5. Remove the nut and disconnect the peanut fitting.
6. Lower the vehicle.
7. Disconnect the air outlet tube.







8. Remove the nut.







9. Remove the bolt. Position the receiver drier away from the radiator shroud and disconnect the receiver drier from the manifold.

INSTALLATION
1. To install, reverse the removal procedure.
- Lubricate the O-ring seal with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent meeting Ford specification WSH-M1C231-B.